‹ All guides
Electrical · 5 min read

What tools does a first-year electrical apprentice need?

You don't need a van full of gear on day one. You need a small set of good hand tools, a way to prove a circuit is dead, and something to carry it all in.

Ask first. Before you spend anything, ask your employer or college for their tool list. Some firms hand you a starter kit, and most provide test equipment and power tools.

1. VDE screwdrivers

This is the tool you'll use more than any other. Get a proper VDE set rated to 1000V, with slotted, Pozi and the combined slotted/Pozi tip that fits most modern terminal screws. A good set keeps its tips for years; a cheap one rounds off in months.

2. Pliers, cutters and strippers

Three tools cover almost everything: combination pliers for gripping and twisting, side cutters for cable, and wire strippers so you're not nicking conductors with a knife. Again, buy VDE-rated.

3. A voltage tester and proving unit

Safe isolation is the first thing you'll be taught and the thing that keeps you alive. That means a two-pole voltage tester that meets HSE guidance GS38, and a proving unit to check the tester works before and after you use it. Don't use a multimeter or a neon screwdriver to prove dead.

Many employers supply these. If yours doesn't, this is the one place not to cut corners.

4. Measuring and marking

A tape measure, a spirit level and a pencil. Nothing clever, but you'll be sent to find one every ten minutes if you don't have your own.

5. Something to carry it in

A tool case or bag with a solid base, so it stands up on a wet floor and you can find things in it. You'll outgrow a small one within a year.

What can wait

The whole list in one place

We've put these together as a ready-made kit with a running total. See the Electrical Essentials starter kit.